Fabtech 08-10 Ford F250 4WD w/Factory Overload 8in Rad Arm Sys w/Dlss– SBX Performance Secure Checkout

Description

Manufacturer Part # : K20341DL

Market Description

• Our patented Radius Arms feature a full tubular structure strengthened by dimple die side plates, with an adjustable alignment cam at the axle to allow caster adjustment. Front spring lift includes the Dirt Logic 4.0 Stainless Steel Coilover Shock conversion. Completing this system is a Trac Bar relocation bracket, Pitman Arm, Sway Bar drops, rear Add-a-leafs, and a Block & U-bolt kit.Includes rear 2.25 Dirt Logic Stainless Steel shocks.
• Our patented Radius Arms feature a full tubular structure strengthened by dimple die side plates, with an adjustable alignment cam at the axle to allow caster adjustment. Front spring lift options includes 6 replacement Coil Springs. Completing this system is a Trac Bar relocation bracket, Pitman Arm, Sway Bar drops, and a rear Block & U-bolt kit.

Associated Comments

TIRE SIZE – 37/13.50R20 WHEEL – 20X10 W/4 1/2″ BS W/MINOR TRIMMING; TIRE SIZE – 355/65R18 WHEEL – 18X9.5 W/4 3/4″ BS W/MINOR TRIMMING; 27. FRONT DRIVE SHAFT MODIFICATION MAY BE REQUIRED TO CLEAR EXHAUST ON GAS MOTOR.

Product Description – Short

• Fabtech 08-10 Ford F250 4WD w/Overload 8in Radius Arm System w/DL 4.0 Coilovers & Rear DL Shocks
• 8″ RAD ARM SYS W/DLS
• LftKt-Suspw/Shock

Product Description – Extended

8in. RAD ARM SYS W/DLSS 4.0 C/O/ RR DLSS 08-10 FORD F250 4WD W/FACTORY OVERLOAD

Product Description – Long

• 8in. RAD ARM SYS W/DLSS 4.0 C/O/RR DLSS 08-10 FORD F250 4WD W/FACTORY OVERLOAD
• 8″ RAD ARM SYS W/DLSS 4.0 C/O& RR DLSS 08-10 FORD F250 4WD W/FACTORY OVERLOAD

AAIA Part Type Description

Suspension Lift Kit