Limited Time Fabtech 08-10 Ford F250/350 4WD 8in Rad Arm Sys w/Dlss 4.0 C/O& Rr Dls – SBX Performance

Description

Manufacturer Part # : K2066DL

Market Description

• Our patented Radius Arms feature a full tubular structure strengthened by dimple die side plates, with an adjustable alignment cam at the axle to allow caster adjustment. Front lift includes the Dirt Logic 4.0 Stainless Steel Coilover Shock conversion and rear 2.25 Dirt Logic Stainless Steel shocks. Completing this system is a Trac Bar relocation bracket, Pitman Arm, Sway Bar drops, U-bolt kit, and replacement rear Leaf Springs.
• Our patented Radius Arms feature a full tubular structure strengthened by dimple die side plates, with an adjustable alignment cam at the axle to allow caster adjustment. Front spring lift options includes 6 replacement Coil Springs. Completing this system is a Trac Bar relocation bracket, Pitman Arm, Sway Bar drops, and a rear Block & U-bolt kit.

Associated Comments

TIRE SIZE – 37/13.50R20 WHEEL – 20X10 W/4 1/2″ BS W/MINOR TRIMMING; TIRE SIZE – 355/65R18 WHEEL – 18X9.5 W/4 3/4″ BS W/MINOR TRIMMING; 3. NON DUALLY MODELS ONLY.; 27. FRONT DRIVE SHAFT MODIFICATION MAY BE REQUIRED TO CLEAR EXHAUST ON GAS MOTOR.; 29. REAR SPRINGS MAY REDUCE LOAD CARRYING CAPACITY.

Product Description – Short

• Fabtech 08-10 Ford F250/350 4WD 8in Radius Arm System w/DL 4.0 Coilovers & Rear DL Shocks
• 8″ RAD ARM SYS W/DLS
• LftKt-Suspw/Shock

Product Description – Extended

8in. RAD ARM SYS W/DLSS 4.0 C/O/ RR DLSS 08-10 FORD F250/350 4WD

Product Description – Long

• 8in. RAD ARM SYS W/DLSS 4.0 C/O/RR DLSS 08-10 FORD F250/350 4WD
• 8″ RAD ARM SYS W/DLSS 4.0 C/O& RR DLSS 08-10 FORD F250/350 4WD

AAIA Part Type Description

Suspension Lift Kit